1986-97 Ford Cargo
1986-97 Ford Cargo
Key and Remote Programming Information
Click to Expand
This vehicle does not use transponder key therefore, no key programming necessary!
Step by Step Programming Instructions:
On-board programming is not available for this model.
Key Blank:
X170/NE48
Secondary Key Blank:
X169/WB3
Transponder/Clone Info:
Not Cloneable
Replacement key blank by Brand:
Ilco – X170/NE48
Key Codes:
E2001–3000
Code Location:
Code is on the ignition cylinder, which must be removed to be seen. A Dremel tool is needed to cut the non-removable screws holding the assembly, which are then removed with a slotted screwdriver.
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| IGNITION | |||||
| DOOR | |||||
| TRUNK | |||||
| *GLOVE | |||||
| *GLOVE |
