1995 Ford Bronco -2/95
1995 Ford Bronco -2/95
Key and Remote Programming Information
Click to Expand
This vehicle does not use transponder key therefore, no key programming necessary!
Step by Step Programming Instructions:
1. Turn ignition to RUN or ACC.
2. Momentarily jump pins in programming connector located at the base of the steering column. All doors will lock then unlock to confirm programming mode.
3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming.
Key Blank:
596758 / H67F
Secondary Key Blank:
321202 / H50
Transponder/Clone Info:
Not Cloneable
Replacement key blank by Brand:
Ilco – H67-P | Jet – H67-PH | Substitute 1 – 596758 | Substitute 2 – 1193FD / H67
Key Codes:
A–B–C–D–E
Code Location:
No codes on vehicle
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| IGNITION | X | X | X | X | X | X | ||||
| DOOR | X | X | X | X | X | X | ||||
| TRUNK | X | X | X | X | X | |||||
| GLOVE | X | X | X | X |
Ignition Switch Lock Cylinder 2 Pcs Door Lock Cylinder with Keys Compatible with 1992-1995 Ford Bronco
H50 Door and Trunk Key For Ford Vehicles with Logo
Ignition Switch Lock Cylinder 2 Pcs Door Lock Cylinder with Keys Compatible with 1992-1995 Ford Bronco