1999 Ford Contour
1999 Ford Contour
Key and Remote Programming Information
Click to Expand
Add Duplicate Key (Requires two working keys):
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within five seconds, insert a second key and turn it to ON (RUN) then back OFF.
4. Insert the new key before ten seconds have elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF
5. The security light will light up for three seconds to indicate that the new key has been successfully programmed.
Step by Step Programming Instructions:
1. Turn ignition to RUN or ACC.
2. Momentarily jump pins in programming connector located behind glove box. The horn will chirp to confirm programming mode.
3. Press any button on first keyless remote. The horn will chirp to confirm programming.
4. Press any button on second keyless remote. The horn will chirp to confirm programming.
5. Turn ignition OFF. the horn will chirp one last time to indicate end of programming mode.
Key Blank:
1196CM/H78
Transponder/Clone Info:
Clone tool with H73-GTK or TPX5-F0-16.P
Replacement key blank by Brand:
Ilco – 1196CM/H78 | Jet – H78-NP
Key Codes:
A–B–C–D–E
Code Location:
No codes on vehicle
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| IGNITION | X | X | X | X | X | X | ||||
| DOOR | X | X | X | X | X | X | ||||
| TRUNK | X | X | X | X | X | X |
Mechanics Choice Ignition Lock Cylinder for 1995-2000 Ford, Mercury Contour, Mystique
