1996 Ford Contour Locks by Valeo
1996 Ford Contour Locks by Valeo
Key and Remote Programming Information
Click to Expand
This vehicle does not use transponder key therefore, no key programming necessary!
Step by Step Programming Instructions:
1. Turn ignition to RUN or ACC.
2. Momentarily jump pins in programming connector located behind glove box. The horn will chirp to confirm programming mode.
3. Press any button on first keyless remote. The horn will chirp to confirm programming.
4. Press any button on second keyless remote. The horn will chirp to confirm programming.
5. Turn ignition OFF. the horn will chirp one last time to indicate end of programming mode.
Key Blank:
1196CM/H78
Transponder/Clone Info:
Not Cloneable
Replacement key blank by Brand:
Ilco – 1196CM/H78 | Jet – H78-NP
Key Codes:
A–B–C–D–E
Code Location:
No codes on vehicle
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| IGNITION | X | X | X | X | X | X | ||||
| DOOR | X | X | X | X | X | X | ||||
| TRUNK | X | X | X | X | X | X |
