1993 Ford Crown Victoria
1993 Ford Crown Victoria
Key and Remote Programming Information
Click to Expand
This vehicle does not use transponder key therefore, no key programming necessary!
Step by Step Programming Instructions:
1. Turn ignition to RUN or ACC.
2. Momentarily jump pins in programming connector located behind glove box. All doors will lock then unlock to confirm programming mode.
3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Key Blank:
596758/H67F
Secondary Key Blank:
321202/H50
Transponder/Clone Info:
Not Cloneable
Replacement key blank by Brand:
Ilco – H67-P | Jet – H67-PH | Substitute 1 – 596758 | Substitute 2 – 1193FD/H67
Key Codes:
A–B–C–D–E
Code Location:
No codes on vehicle
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| IGNITION | X | X | X | X | X | X | ||||
| DOOR | X | X | X | X | X | X | ||||
| TRUNK | X | X | X | X | X | |||||
| GLOVE | X | X | X | X |
H50 Door and Trunk Key For Ford Lincoln Mercury Hummer Mazda Vehicles with Logo
