1996 Ford Explorer (8 Wafer System)
1996 Ford Explorer (8 Wafer System)
Key and Remote Programming Information
Click to Expand
This vehicle does not use transponder key therefore, no key programming necessary!
Step by Step How to Program Instructions:
1.Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Primary Key Blank:
597638 / H75
Transponder/Clone Info:
Not Cloneable
Replacement key blank by Brand:
Ilco – 1196FD/H75 / H75-P | Jet – H75-NP / H75-PH | Hata – HAT-H75-HN / HAT-H75-HP | JMA – FO-15D | Substitute 1 – 322789 / 597638 | Substitute 2 – H75-P / 597037
Key Codes:
0001X to 1706X
Code Location:
No codes on vehicle
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| IGNITION | X | X | X | X | X | X | X | |
| DOOR | X | X | X | X | X | X | ||
| TRUNK | X | X | X | X | X | X | ||
| GLOVE | X | X | X | |||||
| STOWAGE | X | X | X | X |
