No on-board programming is available.

Step by Step How to Program Instructions:

Note: Before you start you must have TWO already programmed keys for your vehicle. If you only have one programmed key you will have to have a locksmith program a second key.

1. Remove the rubber covering from the cup holder between front seats. Place the first programmed key in the backup slot at the bottom of the cup holder, then press the push button ignition switch.
2. Wait five seconds and then press the push button ignition switch again.
3. Remove the first key from cup holder.
4. Within 10 seconds, place a second programmed key in the backup slot. Press the push button ignition switch.
5. Wait five seconds and then press the push button ignition switch again.
6. Remove the second key from the cup holder.
7. Place the new unprogrammed key in the backup slot and press the push button ignition switch.