2012 Acura RDX
2012 Acura RDX
Key and Remote Programming Information
Click to Expand
On-board programming is not available; a programming tool is required.
Step by Step Programming Instructions:
1. Make sure all doors are unlocked.
2. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
3. Press the LOCK button on the remote and release.
4. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
5. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
6. Press the UNLOCK button on the same remote.
7. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
8. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
9. Press the LOCK button on the same remote.
10. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
11. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
12. Press the LOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
13. Press the LOCK button on each remote that you want programmed, including the same remote used to enter programming mode. The door locks will cycle to confirm that the system accepted each remote.
14. Turn the key back to LOCK and remove from ignition to exit programming mode.
Note: The following procedure will only program the remote portion of the flip key. You will have to have a locksmith program the key portion.
Key Blank:
H003-PT
Transponder/Clone Info:
Clone tool with H003-GTK, HD112-ETK-C3, or TPX5-HOND-31.P
Replacement key blank by Brand:
Ilco – H003-PT | Strattec – 5907553 | Jet – HD112-PHT | Bianchi – BHO02-PT | Hata – HAT-HD112-PT | JMA – TP12-HOND-31.P
Key Codes:
K001–N718
Code Location:
Door or Trunk cylinders should have code.
Tumbler Locations
| Spaces | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| IGNITION Left | X | X | X | X | X |
| IGNITION Right | X | X | X | X | Valet |
| DOOR Left | X | X | X | X | |
| DOOR Right | X | X | X | X | Valet |
| GLOVE Left | X | X | X | X | |
| GLOVE Right | X | X | X | Valet |
Honda / Acura HO03 Transponder Key By Ri-Key Security
