1997 Acura CL

1997 Acura CL

Key and Remote Programming Information

How to Program a 1997 Acura CL Key
This vehicle does not use transponder key therefor, no key programming necessary!

How to Program a 1997 Acura CL Keyless Entry Remote Fob

Step by Step Programming Instructions:

1. Turn the ignition switch on (II on the ignition)
2. W/in 1-4 seconds, push the transmitter lock or unlock button with the transmitter aimed at the keyless receiver unit. (Just at the steering wheel is fine)
3. W/in 1-4 seconds, turn the ignition switch off
4. W/in 1-4 seconds, turn the ignition switch on(II)
5. W/in 1-4, push the transmitter lock or unlock button w/ the transmitter aimed at the receiver again.
6. W/in 1-4 seconds, turn the ignition switch off
7. W/in 4 seconds, turn the ignition switch On(II)
8. w/in 1-4 seconds, push the transmitter lock or unlock again.
9. w/in 4 sec, turn the ignition off
10. w/in 4 sec, turn the ignition ON
11. W/in 1-4, push the transmitter again
12. Confirm you can hear the sound of the door actuators. W/in 1-4 seconds, push the trans lock or unlock button again.
13. W/in 10 seconds, aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
14. Turn the ignition switch off, and pull out the key.
15. Confirm proper operation with the new codes

Key Blank:

HD103 | HD103-P | X214 | HOND-16D

Valet Key:

X215 | HD104

Key Codes: 

5001-8442

Code Location: last 4 numbers listed on door, trunk and glove box locks should be your key code

Ignition Cylinder:

C-19-121

This vehicle does not use transponder key therefor, no key programming necessary!

Step by Step Programming Instructions:

1. Turn the ignition switch on (II on the ignition)
2. W/in 1-4 seconds, push the transmitter lock or unlock button with the transmitter aimed at the keyless receiver unit. (Just at the steering wheel is fine)
3. W/in 1-4 seconds, turn the ignition switch off
4. W/in 1-4 seconds, turn the ignition switch on(II)
5. W/in 1-4, push the transmitter lock or unlock button w/ the transmitter aimed at the receiver again.
6. W/in 1-4 seconds, turn the ignition switch off
7. W/in 4 seconds, turn the ignition switch On(II)
8. w/in 1-4 seconds, push the transmitter lock or unlock again.
9. w/in 4 sec, turn the ignition off
10. w/in 4 sec, turn the ignition ON
11. W/in 1-4, push the transmitter again
12. Confirm you can hear the sound of the door actuators. W/in 1-4 seconds, push the trans lock or unlock button again.
13. W/in 10 seconds, aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
14. Turn the ignition switch off, and pull out the key.
15. Confirm proper operation with the new codes

Key Blank:

HD103 | HD103-P | X214 | HOND-16D

Valet Key:

X215 | HD104

Key Codes: 

5001-8442

Code Location: last 4 numbers listed on door, trunk and glove box locks should be your key code

You've just added this product to the cart: