On-board programming is not available; a programming tool is required.

You must complete each step within 4 seconds of the previous step to keep the system from exiting  the programming mode. You must program remotes within 10 seconds of each other.

1. Turn ignition switch to ON (II)
2. Within 4 seconds press the LOCK or UNLOCK button on one of the remotes.
(An unprogrammed remote can be used for this step.)
3. Within 4 seconds turn ignition switch to LOCK (0) position
4. Within 4 seconds turn the ignition switch to ON (II), Then OFF
5. Repeat steps 2, 3 and 4 two more times using the same keyless remote used in step 2
6. Within 4 seconds press the LOCK or UNLOCK button on all other remotes you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
9. Turn the ignition switch to LOCK (0) to exit programming mode.
10. Remove key wait 10 seconds and Test remote(s)   

This vehicle is not on board programmable and requires a qualified professional to program smart key remote fobs.